| 1. |
- Abramavicius, V., et al.
(författare)
-
Role of coherence and delocalization in photo-induced electron transfer at organic interfaces
- 2016
-
Ingår i: Scientific Reports. - : NATURE PUBLISHING GROUP. - 2045-2322. ; 6:32914
-
Tidskriftsartikel (refereegranskat)abstract
- Photo-induced charge transfer at molecular heterojunctions has gained particular interest due to the development of organic solar cells (OSC) based on blends of electron donating and accepting materials. While charge transfer between donor and acceptor molecules can be described by Marcus theory, additional carrier delocalization and coherent propagation might play the dominant role. Here, we describe ultrafast charge separation at the interface of a conjugated polymer and an aggregate of the fullerene derivative PCBM using the stochastic Schrodinger equation (SSE) and reveal the complex time evolution of electron transfer, mediated by electronic coherence and delocalization. By fitting the model to ultrafast charge separation experiments, we estimate the extent of electron delocalization and establish the transition from coherent electron propagation to incoherent hopping. Our results indicate that even a relatively weak coupling between PCBM molecules is sufficient to facilitate electron delocalization and efficient charge separation at organic interfaces.
|
|
| 2. |
- Admassie, Shimelis, et al.
(författare)
-
Biopolymer hybrid electrodes for scalable electricity storage
- 2016
-
Ingår i: Materials Horizons. - : ROYAL SOC CHEMISTRY. - 2051-6347 .- 2051-6355. ; 3:3, s. 174-185
-
Forskningsöversikt (refereegranskat)abstract
- Powering the future, while maintaining a cleaner environment and a strong socioeconomic growth, is going to be one of the biggest challenges faced by mankind in the 21st century. The first step in overcoming the challenge for a sustainable future is to use energy more efficiently so that the demand for fossil fuels can be reduced drastically. The second step is a transition from the use of fossil fuels to renewable energy sources. In this sense, organic electrode materials are becoming increasingly attractive compared to inorganic electrode materials which have reached a plateau regarding performance and have severe drawbacks in terms of cost, safety and environmental friendliness. Using organic composites based on conducting polymers, such as polypyrrole, and abundant, cheap and naturally occurring biopolymers rich in quinones, such as lignin, has recently emerged as an interesting alternative. These materials, which exhibit electronic and ionic conductivity, provide challenging opportunities in the development of new charge storage materials. This review presents an overview of recent developments in organic biopolymer composite electrodes as renewable electroactive materials towards sustainable, cheap and scalable energy storage devices.
|
|
| 3. |
- Ajjan, Fátima, et al.
(författare)
-
Enhancing Energy Storage Devices with Biomacromolecules in Hybrid Electrodes
- 2019
-
Ingår i: Biotechnology Journal. - : WILEY-V C H VERLAG GMBH. - 1860-6768 .- 1860-7314. ; 14:12
-
Forskningsöversikt (refereegranskat)abstract
- The development of energy storage devices with higher energy and power outputs, and long cycling stability is urgently required in the pursuit of the expanding challenges of electrical energy storage. The utilization of biologically renewable redox compounds holds a great potential in designing sustainable energy storage systems and contributes in reducing the dependence on fossil fuels for energy materials. Quinones are the principal redox centers in natural organic materials and play a key role as charge storage electrode materials because of their abundance, multiple forms and integration into the materials flow through the biosphere. Electrical energy storage devices and systems can be significantly improved by the combination of scalable quinone-based biomaterials with good electronic conductors. This review uses recent examples to show how biopolymers are providing new directions in the development of renewable biohybrid electrodes for energy storage devices.
|
|
| 4. |
- Ajjan, Fátima, et al.
(författare)
-
High performance PEDOT/lignin biopolymer composites for electrochemical supercapacitors
- 2016
-
Ingår i: Journal of Materials Chemistry A. - : ROYAL SOC CHEMISTRY. - 2050-7488 .- 2050-7496. ; 4:5, s. 1838-1847
-
Tidskriftsartikel (refereegranskat)abstract
- Developing sustainable organic electrode materials for energy storage applications is an urgent task. We present a promising candidate based on the use of lignin, the second most abundant biopolymer in nature. This polymer is combined with a conducting polymer, where lignin as a polyanion can behave both as a dopant and surfactant. The synthesis of PEDOT/Lig biocomposites by both oxidative chemical and electrochemical polymerization of EDOT in the presence of lignin sulfonate is presented. The characterization of PEDOT/Lig was performed by UV-Vis-NIR spectroscopy, FTIR infrared spectroscopy, thermogravimetric analysis, scanning electron microscopy, cyclic voltammetry and galvanostatic charge-discharge. PEDOT doped with lignin doubles the specific capacitance (170.4 F g(-1)) compared to reference PEDOT electrodes (80.4 F g(-1)). The enhanced energy storage performance is a consequence of the additional pseudocapacitance generated by the quinone moieties in lignin, which give rise to faradaic reactions. Furthermore PEDOT/Lig is a highly stable biocomposite, retaining about 83% of its electroactivity after 1000 charge/discharge cycles. These results illustrate that the redox doping strategy is a facile and straightforward approach to improve the electroactive performance of PEDOT.
|
|
| 5. |
- Ajjan, Fátima, et al.
(författare)
-
Innovative polyelectrolytes/poly(ionic liquid)s for energy and the environment
- 2017
-
Ingår i: Polymer international. - : WILEY. - 0959-8103 .- 1097-0126. ; 66:8, s. 1119-1128
-
Forskningsöversikt (refereegranskat)abstract
- This paper presents the work carried out within the European project RENAISSANCE-ITN, which was dedicated to the development of innovative polyelectrolytes for energy and environmental applications. Within the project different types of innovative polyelectrolytes were synthesized such as poly(ionic liquid)s coming from renewable or natural ions, thiazolium cations, catechol functionalities or from a new generation of cheap deep eutectic monomers. Further, macromolecular architectures such as new poly(ionic liquid) block copolymers and new (semi)conducting polymer/polyelectrolyte complexes were also developed. As the final goal, the application of these innovative polymers in energy and the environment was investigated. Important advances in energy storage technologies included the development of new carbonaceous materials, new lignin/conducting polymer biopolymer electrodes, new iongels and single-ion conducting polymer electrolytes for supercapacitors and batteries and new poly(ionic liquid) binders for batteries. On the other hand, the use of innovative polyelectrolytes in sustainable environmental technologies led to the development of new liquid and dry water, new materials for water cleaning technologies such as flocculants, oil absorbers, new recyclable organocatalyst platforms and new multifunctional polymer coatings with antifouling and antimicrobial properties. All in all this paper demonstrates the potential of poly(ionic liquid)s for high-value applications in energy and enviromental areas. (c) 2017 Society of Chemical Industry
|
|
| 6. |
- Ajjan, Fátima, et al.
(författare)
-
Scalable Asymmetric Supercapacitors Based on Hybrid Organic/Biopolymer Electrodes
- 2017
-
Ingår i: ADVANCED SUSTAINABLE SYSTEMS. - : WILEY-V C H VERLAG GMBH. - 2366-7486. ; 1:8
-
Tidskriftsartikel (refereegranskat)abstract
- A trihybrid bioelectrode composed of lignin, poly(3,4-ethylenedioxythiophene) (PEDOT), and poly(aminoanthraquinone) (PAAQ) is prepared by a two-step galvanostatic electropolymerization, and characterized for supercapacitor applications. Using PEDOT/Lignin as a base layer, followed by the consecutive deposition of PAAQ, the hybrid electrode PEDOT/Lignin/PAAQ shows a high specific capacitance of 418 F g(-1) with small self-discharge. This trihybrid electrode material can be assembled into symmetric and asymmetric super-capacitors. The asymmetric supercapacitor uses PEDOT + Lignin/PAAQ as positive electrode and PEDOT/PAAQ as negative electrode, and exhibits superior electrochemical performance due to the synergistic effect of the two electrodes, which leads to a specific capacitance of 74 F g(-1). It can be reversibly cycled in the voltage range of 0-0.7 V. More than 80% capacitance is retained after 10 000 cycles. These remarkable features reveal the exciting potential of a full organic energy storage device with long cycle life.
|
|
| 7. |
- Ajjan, Fátima, et al.
(författare)
-
Spectroelectrochemical investigation of redox states in a polypyrrole/lignin composite electrode material
- 2015
-
Ingår i: Journal of Materials Chemistry A. - : ROYAL SOC CHEMISTRY. - 2050-7488 .- 2050-7496. ; 3:24, s. 12927-12937
-
Tidskriftsartikel (refereegranskat)abstract
- We report spectroelectrochemical studies to investigate the charge storage mechanism of composite polypyrrole/lignin electrodes. Renewable bioorganic electrode materials were produced by electropolymerization of pyrrole in the presence of a water-soluble lignin derivative acting as a dopant. The resulting composite exhibited enhanced charge storage abilities due to a lignin-based faradaic process, which was expressed after repeated electrochemical redox of the material. The in situ FTIR spectroelectrochemistry results show the formation of quinone groups, and reversible oxidation-reduction of these groups during charge-discharge experiments in the electrode materials. The most significant IR bands include carbonyl absorption near 1705 cm(-1), which is attributed to the creation of quinone moieties during oxidation, and absorption at 1045 cm(-1) which is due to hydroquinone moieties.
|
|
| 8. |
- Bakulin, Artem A., et al.
(författare)
-
Morphology, Temperature, and Field Dependence Separation in High-Efficiency Solar Cells Based on Polyquinoxaline Copolymer
- 2016
-
Ingår i: The Journal of Physical Chemistry C. - : AMER CHEMICAL SOC. - 1932-7447 .- 1932-7455. ; 120:8, s. 4219-4226
-
Tidskriftsartikel (refereegranskat)abstract
- Charge separation and recombination are key processes determining the performance of organic optoelectronic devices. Here we combine photoluminescence and photovoltaic characterization of organic solar cell devices with ultrafast multipulse photocurrent spectroscopy to investigate charge generation mechanisms in the organic photovoltaic devices based on a blend of an alternating polyquinoxaline copolymer with fullerene. The combined use of these techniques enables the determination of the contributions of geminate and bimolecular processes to the solar cell performance. We observe that charge separation is not a temperature-activated process in the studied materials. At the same time, the generation of free charges shows a dear external field and morphology dependence. This indicates that the critical step of charge separation involves the nonequilibrium state that is formed at early times after photoexcitation, when the polaronic localization is not yet complete. This work reveals new aspects of molecular level charge dynamics in the organic light-conversion systems.
|
|
| 9. |
- Bergqvist, Jonas, et al.
(författare)
-
Asymmetric photocurrent extraction in semitransparent laminated flexible organic solar cells
- 2018
-
Ingår i: npj Flexible Electronics. - : Springer Science and Business Media LLC. - 2397-4621. ; 2:1
-
Tidskriftsartikel (refereegranskat)abstract
- Scalable production methods and low-cost materials with low embodied energy are key to success for organic solar cells. PEDOT(PSS) electrodes meet these criteria and allow for low-cost and all solution-processed solar cells. However, such devices are prone to shunting. In this work we introduce a roll-to-roll lamination method to construct semitransparent solar cells with a PEDOT(PSS) anode and an polyethyleneimine (PEI) modified PEDOT(PSS) cathode. We use the polymer:PCBM active layer coated on the electrodes as the lamination adhesive. Our lamination method efficiently eliminates any shunting. Extended exposure to ambient degrades the laminated devices, which manifests in a significantly reduced photocurrent extraction when the device is illuminated through the anode, despite the fact that the PEDOT(PSS) electrodes are optically equivalent. We show that degradation-induced electron traps lead to increased trap-assisted recombination at the anode side of the device. By limiting the exposure time to ambient during production, degradation is significantly reduced. We show that lamination using the active layer as the adhesive can result in device performance equal to that of conventional sequential coating.
|
|
| 10. |
- Bergqvist, Jonas, et al.
(författare)
-
LED array scanner for inline characterization of thin film photovoltaic modules
- 2016
-
Ingår i: Solar Energy Materials and Solar Cells. - : Elsevier. - 0927-0248 .- 1879-3398. ; 157:17, s. 1057-1064
-
Tidskriftsartikel (refereegranskat)abstract
- Thin film solar cells, and in particular printed organic solar cells, offer a potential route to a low cost power generation from sunlight. However, manufacturing these solar cells rapidly generates large areas that have to be characterized, preferably in-line for a direct feed back in the production process. Here we introduce the LEDimage, a LED array illumination induced photocurrent method suitable for high speed inline characterization and defect detection of organic solar cell modules. The LEDimage enables simultaneous illumination of all connected subcells without additional bias light. Each LED in the array is amplitude modulated at an individual frequency and the photocurrent response is Fourier transformed to generate a photocurrent map. Furthermore, the LEDimage can be used as a hand scanner for fast device characterization. We expect that LEDimage can be an effective research and industry tool for characterization of large area thin film solar cells.
|
|
